Kit #1 – JK VVT 5.7L Truck Hemi


*This Kit is OFF ROAD ONLY in the state of California*

5.7L VVT Truck Hemi/545RFE Transmission ( $6000.00 Used engine,Transmission)  (New Engine and transmission $10,000.00)

Labor 50 Hours $6250.00

Install Kit $4700.00

Radiator C&R $1700.00

Fan Shroud $250.00

Exhaust System $900.00

2 Exhaust Manifolds $250.00

2 Engine Mounts $220.00

Trans Cooler $100.00

Upper, lower hoses, heater hoses, hose clamps $100.00

Air Filter, 3.5 inch intake tube and clamps $100.00

Transmission Valve body $500.00, (for the 545RFE trans from 2011-2015)

AC Compressor $450.00 (from 2013 on up Hemi engines)

Power Steering pump for the Hemi engines with no power steering $250.00 PSC

Transmission fluid, engine oil, coolant, radiator cap 16 Pounds, $250.00

Add Ons

Bolt in engine mounts

We have been working on a all new way to put a Hemi in a Jeep JK Wrangler with out have to cut the old mounts from the frame.

Left mount to engine

Right mount to engine

Left Isolator

Right Isolator


6 mounting bolts to Isolator to engine mount

Knock sensor relocation bolt


Jeep JK Hemi Headers

Collectors and clamps

here is the mounting collector and clamps 2 1/2 pipes

Header Gaskets

Gaskets for our headers


This is the DIY Kit Parts List:

*California resident this is for off road use only*

  • Computer (JKVVTHTC07-11)
  • Wiring (JKVVTHT1 or JKVVTHT2)
  • VVT Truck Hemi intake adapter/with bolts (VVTHIA)
  • Transmission Cooler Mounts (JKTCM)
  • Trans Mount, to trans (545TA)
  • Plate A
  • Plate B
  • 2 AC lines (JKTACHS, JKTACLS)
  • Fuel line adapter (VVTHFL)
  • Hemi Dual Battery Box, TIPM mount, top plate, J bolt and nut (JKDBB)
  • Air intake mount, with grommet (JKAFM)
  • Power steering mount (JKVVTPSM)
  • Steering relocation moulnt (JKSRM)
  • Engine mounts to frame, left and right (JKWEM)
  • AC bolt
  • Radiator C&R (CRJKHT)
  • Shroud (JKHS)
  • Exhaust system (102400JK)
  • Header exhaust system (102500JK)
  • Headers for Jeep JK Left Header (102417), Right Header (102416)

Click here for JSS GUIDES and a BOM list of all the additional parts you will need.

This is the SHOP INSTALL Parts List:

VVT 5.7L Truck Hemi Kit #1 –  2007-2017 Jeep JK Jeeps (2 door and 4 door Jeeps). The engines used are from 2009-2016/ If you have a 2012-2016 Jeep JK you will be reusing your Transmission, if you have a 2007-2011 you will need the 545RFE transmission, from 2005-2010 does not need a valve body, the 2011-2015 will need a valve body, We can now use the 65RFE transmission from 2011-2017 Dodge Ram 1500 truck.

*This Kit is OFF ROAD ONLY in the state of California *

*Every state other than CA montiors and cats will pass..

*We do offer a Carb legal option!

JSS ON-SITE  install of Kit #1  $24,500.00

Additional information

Weight 70 lbs
Dimensions 24 × 17 × 18 in