2007-2011 Jeep JK LS Swap Info

PRNDL box out puts
S10 Yellow/blue
S20 Green/Red
S30 Green/Blue
S40 Green/Black
S+ Red
SC White
S- Black

AC control switch we need to connect to pin 5, this is a tap in, no cutting the wires, this goes to the PRNDL box in the AC connector side on the input.

Out of the PRNDL box, for the AC we go to the Jeep ECM and tie in to the C3 pin 11, light blue and Orange.

When we do the LS in a JK we need to reuse the, Crank sensor, Water temp sensor, Oil pressure sensor, Battery cables.