Kit #11- Jeep TJ 1997-2000 5.7L Truck Hemi 545RFE

$4,200

Add Ons

Description

Jeep TJ 1997-2000 5.7L Truck Hemi/545RFE (or DIY kits the 5 Speed Manual will be used from the stock 5 spd from the Jeep).*

The kit is for Jeep Speed Shop to do the install and the kit will come with a low mile 5.7L truck Hemi engine and a 545RFE transmission.

The biggest difference between the 1997-2000 is theFuel pump/Evap system and the Cluster. The Cluster in the 1997-2000 will not work so we have to change out the cluster for a Cluster out of a 2001-2006 and wire it in.

Also the fuel system does not have enough fuel pressure so we have to change out the fuel pump and change the evap canister so it will operate correctly.

This it the DIY Kit Parts List:

  • #1 Wiring harness
  • #2 Computer
  • #3 Aluminum Radiator
  • #4 Engine Mounts
  • #5 Trans Mount
  • #6 AC Lines
  • #7 Gas Pedal mount

Click here for JSS GUIDES and a BOM list of all the additional parts you will need.

This is the SHOP INSTALL Parts List:

  • #1 5.7L Truck Hemi and a 545RFE Transmission
  • #2 Wring Harness for the engine/Battery cables
  • #3 Computer
  • #4 Engine Mounts
  • #5 Trans Mount
  • #6 Aluminum Radiator/Hoses {upper-lower} Heater hoses-clamps
  • #7 Air filter AEM Cal. CARB Legal
  • #8 Fuel Pump/Fuel lines
  • #9 Evap Canister {Truck Style} Redo Evap lines {used}
  • #10 Cluster/wiring {used Cluster}
  • #11 Power Steering hoses
  • #12 Engine Fan/Clutch
  • #13 Gas Pedal Mount/Gas Pedal
  • #14 T case shifter
  • #15 AC Lines and new dryer, also Recharge AC
  • #16 Exhaust system
  • #17 1 inch body lift

JSS ON-SITE  install of Kit #11  $14,500.00

Please note: We can also help you get a California Emissions label with this conversion for an extra $1,000.00

In order to be smog legal, new Federal Emissions laws state that your Jeep must be at least 8 years old or have at least 80k miles on it in order to be eligible for an emissions label.

We will also keep your engine and trans as a core if you want it back it will be $1,000.00

For all TJ and LJ Jeeps, in-house Hemi conversions can take up to 7 weeks to complete. It usually takes about 5 weeks to do the wiring harness and an additional 2 weeks to perform the swap itself.

* 5 Speed Manual Transmissions not done on site, DIY only.

**This part is was formerly called TJ Hemi Kit A From our old web site

Additional information

With or without Professional Installation

With, Without